12 series磁致伸缩位移传感器介绍

发布时间:2019-06-16浏览次数:13

12系列数码模拟输出磁致伸缩位移传感器是专为壁厚控制伺服油缸而设计。其优点是极高精度和超短有效行程。可以直接安装在壁厚控制油缸顶端。数码模拟电压/电流输出能有交效地减少周边设备噪音干扰。

  12 series digital analog output magnetic levitation displacement sensoris designed for wall thickness control servo cylinderDesign. The advantageisa very high accuracy and short effective stroke. Thickness control can beinst alled directly .The top of the fuel tank system. Digital analog voltage / current output can have a cross-effectively reduce noise peripheralsInterference.

  12列是采用非接触式磁悬浮测量技术。此技术能提供高 精准、直接和绝对值的位移输出。而且能消除所有工作磨损面带来的误差。

  12 is a non-contact measurement of magnetic levitation technology.This technologycan provide high precision,Direct and absolute displacement output.Andall the work to eliminate errors caused by wear surface.

12系列磁致伸缩位移传感器

  电子部分为IP65等,使电子模块受到最佳的抗震,防尘和防潮保护,输出连接为业界常用的航空接头(D60),即方便又容易接线。

  Electronic part is IP65, so that the electronic module being the bestshock, dust and moisture protectionProtection, output connector commonly usedin theaviation industryconnector (D60), that is convenient and easy wiring.




你觉得这篇文章怎么样?

0 0

易测电气微信扫码 关注我们

  • 24小时咨询热线

    24小时咨询热线075585271862

  • 电话

    移动电话13728880902

Copyright © 2018 易测电气 地址:深圳市宝安区松岗街道红星社区宏海大厦5楼 备案号:粤ICP备19052563号-7 网站地图百度 / 谷歌

技术支持:易测电气 [易测电气]